Team kalorik TKG CKP 1001 Manual De Instrucciones página 6

Fax +32 2 359 95 50

FIELD OF APPLICATION/OF OPERATION
• Use the appliance for domestic purposes only and in the way indicated in these
instructions.
• This appliance is intended to be used for domestic applications and similar applications
such as:
Kitchen corners reserved for personnel in shops, offices and other professional
o
environments.
Farms.
o
The use by clients of hotels, motels and other environments with a residential
o
character.
Environments of the "bed and breakfast" type.
o
USE
• First check that the voltage marked on the product is the same as your supply voltage.
• Select a suitable position close to an electric socket, on a dry and even surface.
• Make sure the control is in the OFF position (MIN). Plug in.
• The invisible protective coating must be removed before you can use the appliance. To
do this, set the control to the maximum setting and leave switched on for approximately
3-5 minutes. Smoke will develop make sure that the room is ventilated. Switch off the
cooking plate and allow to cool down completely. The cooking plate is now ready for
use.
• Always use flat-bottomed saucepans, which make good contact with the cooking plate.
The saucepan bases should ideally be of the same size as the cooking plate.
• Select the temperature. Turn temperature controller from "MIN" to "MAX" and adjust during
cooking as needed. The cooking plate has a range of temperatures. The indicator light will
turn on to indicate that the cooker is heating. The indicator light will turn off when it
reaches the selected temperature.
• Due to the cooking plate's construction, residual heat will remain after switching off. This
may be used to keep food warm for a short period.
• After use, turn the temperature dial to "MIN" and unplug the appliance from the electrical
outlet.
Note:
• Use only stainless steel, aluminium and ceramic. NOT GLASS.
• Use cooking pots or pans that have a flat base.
• The diameter of the pan base needs to be smaller than the diameter of the heating
plate.
CLEANING
• Before cleaning, unplug and wait for the appliance to cool down.
• Wipe with a moistened cloth.
• Do not clean with any abrasive scouring pad or steel wool, as this will damage the finish.
• Do not immerse in water or any other liquid.
Copies of the I/B. Please reproduce them without any
changes except under
International BELGIUM. The pages must be reproduced and
folded in order to obtain a booklet A5 (+/- 148.5 mm width x
210 mm height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don't change
the page numbering. Keep the language integrity.

Back cover page (last page)
Assembly page 6/41
special instruction from Team