Technical Data - Bosch PLL 5 Manual Original

OBJ_BUCH-311-010.book Page 19 Tuesday, January 10, 2017 2:55 PM
7 Aluminium supporting surface
8 Exit opening for laser beam
9 Latch of battery lid
10 Battery lid
11 Supporting points
12 Laser warning label
13 Magnets
14 Serial number
15 On/Off switch

Technical Data

Line laser
Article number
1)
Working range to approx.
2)
Levelling Accuracy
Operating temperature
Storage temperature
Relative air humidity, max.
Laser class
Laser type
C
6
3)4)
Laser line width
– at a distance of 1.5 m
– at a distance of 5 m
Batteries
Weight according to EPTA-Procedure 01:2014
Dimensions
1) when using the wall holder 1; under unfavourable conditions such as intense sun
irradiation, the working range is smaller
2) when the measuring tool is positioned correctly (see "Positioning the Measuring
Tool", page 21)
3) at 25 °C
4) The width of the laser line depends on the surface characteristics and on the
ambient conditions.
The measuring tool can be clearly identified with the serial number 14 on the type
plate.
Bosch Power Tools
English | 19
PLL 5
3 603 K15 0..
5 m
±1 mm/m
+5 °C...+40 °C
–20 °C...+70 °C
90 %
2
635 nm, <1 mW
2
2 mm
4 mm
2 x 1.5 V LR03 (AAA)
0.12 kg
142 x 27 x 30 mm
1 609 92A 1Y7 | (10.1.17)