Vimar TAB 40507 Guía Rápida página 23

TAB: 40507
While configuration is in progress, the installer is informed of the status by some messages.
If a problem occurs during configuration and the procedure is interrupted, the installer will be notified by a message similar to that in the figure below.
If the configuration procedure is completed successfully, the screen will display a summary of the configuration information.
On completion of the procedure, the installer may proceed with customization of the parameters of the device, alternatively the default settings
may be maintained and the device may be used for call functions.
For details regarding call functions and all configuration parameters, refer to the chapters in the manual which can be downloaded from the
website www.vimar.com.
WiFi/Mobile devices
In the "WiFi/Mobile devices" section, you can set the parameters for connection to a Wi-Fi network or for activation of the Hotspot function
(network router), and also specify the mobile devices you wish to use for call transfers.
After having installed the Video Door app on your mobile and completed the Connection Wizard, follow the instructions of
the Configuration Wizard.
For further information, refer to the User Manual, which can be downloaded from the website www.vimar.com
23
EN