Assembling The Pedals - Legend MILANO Manual De Usuario Y Garantía

GETTING STARTED_

ASSEMBLING THE PEDALS

The pedals have a special adjustment system. When assembling them, you should make sure you have selected the
right pedal for its crank: we place the right pedal on the right crank, indicated with the letter R (Right); and the left pedal
on the left crank, indicated with the letter L (Left).
Check that the holes are free of obstacles and, if possible, add some grease. Always screw the pedals onto the crank in
the direction of pedalling. Try not to force the screw as it could damage the threads and make them unusable.
Use a 6mm Allen key or 15mm wrench to screw the pedals onto the cranks.
Recommended tightening torque: 35 Nm
[EN]
13