Publicidad
English
Operation Instructions
1. Installation
Install the SolarWay-2 in an open area where the sun can shine on it in order to
maximize the use of its built-in rechargeable battery. Find an appropriate
mounting location that is free from cold or hot winds, lightning, and extremely
high temperatures. Use screws that are fixed on the wall for mounting.
2. Operation
Locate the Main Power Button located at the rear of the SolarWay-2. Keep it
turned OFF during transportation or whenever the SolarWay-2 is not in use.
Once you're ready to start using it, turn the switch to ON.
Use the Work Mode Button to choose between two usage options: AUTO or ON.
The amount of time that the SolarWay-2 stays on will depend on how much
charge it carries. If set to AUTO, it can last all night if it is charged properly for
11-12 hours. If set to ON, it will run down the battery and may last anywhere
from a few minutes to a few hours depending on how much charge is available.
User discretion is advised.
4
Publicidad
