Promate SolarWay-3 Guia Del Usuario página 5

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 6
English
Operation Instructions
1. Installation
Install the SolarWay-3 in an open area where the sun can shine on it to maximize
the use of its built-in rechargeable battery. Find an appropriate mounting location
that is free from cold or hot winds, lightning, and extremely high temperatures. Use
screws that are fixed on the wall for mounting.
2. Operation
Locate the Main Power Button located on the front of the SolarWay-3. Keep it
turned OFF during transportation or whenever the SolarWay-3 is not in use. Once
you're ready to start using it, turn the switch to ON.
The amount of time that the SolarWay-3 stays on will depend on how much charge
it carries. It can last for up to 1.5 hours if it is charged properly for 6-8 hours. If set
to ON, it will run down the battery and may last anywhere from a few minutes to
more than an hour depending on how much charge is available. User discretion is
advised.
4

Publicidad

Tabla de contenido
loading

Tabla de contenido