Step 4: Configuring The Printserver Using The Web-Based Utility; Accessing The Web-Based Utility - Linksys EtherFast Serie Guía De Instalación Rápida

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 38
D. Continue with the setup program's instructions.
Setup will copy the necessary files to your sys-
tem. Click OK to complete the setup.
E. To start the Bi-Admin program, click Start, and select Programs. Click
Linksys PrintServer Admin, and choose Bi-Admin. If the Bi-Admin icon
has been created, you can just double-click on it instead. You can drag the
shortcut icon onto your Desktop for easy access to the Bi-Admin program.
E
You have successfully installed the PrintServer.
To utilize the Web-based Utility, proceed to Step 4.
10
Instant EtherFast
®
Series
D
EtherFast
®
10/100 PrintServers
Step 4: Configuring the PrintServer
Using the Web-based Utility

Accessing the Web-based Utility

Use the following directions to utilize the PrintServer's built-in Web-based
Utility to configure your PrintServer.
Open your web browser and type http:// followed by the PrintServer's IP
address in the browser's Address box. Use the Bi-Admin software to find the
IP address. Then, press the Enter key.
The Password Screen will appear.
N N o o t t e e : If you have previously set a password for the
PrintServer, you will see one of the two screens
below. If a password has not been set, you will pro-
ceed to the Setup screen shown on the next page.
Leave the User Name field blank. Enter the password if one has previously
been assigned to the PrintServer. Then, click the OK button.
11

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Etherfast 10/100Epxs3Ppsx1Efsp4

Tabla de contenido