The Server; The Printer Page; The Tcp/Ip Page - Linksys EtherFast Serie Guía De Instalación Rápida

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 38
The Server Page
When the Configure Server screen appears, enter the PrintServer name (in
the example shown here SC5300C2). Then enter your password (if you creat-
ed one) into the Password field and type it again in the Verify Password field
to confirm it. Check all boxes that apply to your network next to the Enable
area under Protocols. Generally, AppleTalk is only for Macintosh networks.
IPX/SPX and NetBEUI are usually associated with PC-based networks. If you
are unsure, however, you may check all boxes. This option, while giving you
the greatest chance of connection, increases network traffic. Once you've
made all your choices, click the Save button.

The Printer Page

Click the Printers tab
to open the Printer
Status screen. On this
screen, you will be able
to see the status of any
printers connected to
the PrintServer.
You
can also test the printers
by clicking the Print
Test Page button corre-
sponding to the printer
you want to test.
12
Instant EtherFast
®
Series
EtherFast
®
10/100 PrintServers

The TCP/IP Page

Click the TCP/IP tab to view or change the PrintServer's TCP/IP values. If
you are using DHCP to assign IP addresses, select DHCP Client. If you need
to assign the PrintServer a Fixed IP Address (also known as Static IP
Address), select this option and enter the appropriate values under Device IP
Address, Gateway IP Address, and Subnet Mask.
While the Device IP Address is unique to the PrintServer, the Subnet Mask and
Gateway IP Address are the same as any PC connected to the network. If you
change the PrintServer's IP address, make sure that you reconnect to the
PrintServer using that new IP address. Otherwise, you will not be communi-
cating with the PrintServer.
Under the Connection settings, you can set how long you want the PrintServer
to delay between attempting connections to the network. You can also specify
the number of times that the PrintServer will attempt to make a connection.
Enter your chosen values in the boxes provided.
If you want to reset the settings for this screen, you can click the Retrieve
Defaults button to return to the factory default settings.
If you make any mistakes prior to saving, click the Cancel button to exit the
screen without making any changes.
Once you are certain of any changes you have made, click the Save button to
implement the changes.
13

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Etherfast 10/100Epxs3Ppsx1Efsp4

Tabla de contenido