Braun Silk-epil SoftPerfection 3280 Manual Del Usuario página 9

Some useful tips
Epilation is easier and more comfortable
when the hair is at the optimum length of
2–5 mm (0.08–0.2 in). If hairs are longer,
we recommend that you either shave first
and epilate the shorter re-growing hairs
after 1 or 2 weeks.
When epilating for the first time, it is
advisable to epilate in the evening, so that
any possible reddening can disappear
overnight. To relax the skin we recom-
mend applying a moisture cream after
epilation.
Fine hair which re-grows might not grow
up to the skin surface. The regular use
of massage sponges (e.g. after showering)
or exfoliation peelings helps to prevent
in-growing hair as the gentle scrubbing
action removes the upper skin layer and
fine hair can get through to the skin
surface.
Description
(see page 4)
Massaging rollers clip
1
Epilation head
2
Release buttons
3
Switch
4
Socket for cord connector
5
Cord connector
6
12 V transformer plug
7
Cooling application (not with all
models):
Gel pack
8a
Cooling glove
8b
Preparing your skin
Your skin must be dry and free from
grease or cream.
Optional skin cooling: For the first few
epilations or if you have sensitive skin,
you can use the cooling application,
recommended by dermatologists to help
reduce possible skin irritation.
10
• Ensure that the gel pack has been in
the deep freezer (***) for at least 2 hours
(for convenience you can store the gel
packs in the freezer).
• Insert the gel pack underneath the
glove's transparent foil. Use only with
glove.
• Put transparent (cool) side of the glove
on your leg.
• Start cooling for approx. 1/2 minute,
longer if needed.
• Epilate the cooled skin area immedi-
ately.
• Repeat cooling and epilating until
completion.
• While epilating, please ensure your skin
is dry.
Important: Apply cooling glove to the
same area for no longer than 2 minutes.
Keep away from sunlight. Do not use
gel pack when damaged. Dispose of in
household waste. Do not use if you are
hypersensitive, allergic to the cold, or if
your skin suffers from sensory disturb-
ances, when suffering from cardiac dis-
eases or arterial circulatory disorders.
How to epilate
• Before starting, thoroughly clean the
epilation head
• Plug the cord connector
socket and plug the transformer plug
5
into an electrical outlet.
7
1 To turn on the appliance, slide switch
to setting «2»
4
(«2» = normal speed,
«1» = reduced speed).
2 Rub your skin to lift short hairs.
For optimum performance hold the
appliance at a right angle (90°) against
your skin. Guide it in a slow, continuous
movement without pressure against
.
2
into the
6