Spout Installation; Handle Installation - Oxygenics VITALITY Instrucciones De Montaje

SPOUT INSTALLATION

2
2.
Place the Faucet Spout (A) into center opening in sink.

HANDLE INSTALLATION

4
B
4.
Insert HOT Spout Handle (B) on the left opening in sink.
Insert COLD Spout Handle (C) on the right opening in sink.
Align handles as shown (Handles are in off position).
A
3.
C
5.
3
F
G
H
From below the sink, slide the Spout Washer (F) and Spout
Bracket (G) onto the spout waterway. Thread the Spout Nut
(H) onto the spout waterway. Tighten Spout Nut (H)
clockwise with a wrench as seen in Figure 2.
5
D
E
Attach Handle Washer (D), and Handle Nut (E) to threaded
Spout Handle waterway. Securely tighten Handle Nut (E) by
hand. Repeat with second Spout Handle waterway.
FIG 2