Gigabyte 3D Rocket Cooler PRO GH-PCU22-VG Guia De Instalacion

<Precautions>
The cooler fan speed levels provided are for reference use only. Please refer to the motherboard BIOS to verify actual fan speed
levels.
Once the power supply cable is connected to the PCB of the cooler, please secure the partly transparent cover of the cooler prior to
ope ration.
<Warranty coverage does not include the following>
Incorrect method of operation or use of product not for intended use
Operational use beyond the advised standards (eg. overclocking)
Inability to install the product as a result of incompatibility with the motherboard used
Damage of product as a result of other product components
Any form of alteration to original product
A faulty product that le ads to harm or damage to other products
Damage caused by natural disasters (eg. earthquake, fire, flood)
Products with a warranty sticker that is removed, torn or unreadable
<注意事項>
散熱器的轉速數值只供參考用，實際的數值請從主機板的BIOS來確認散熱器的迴轉數。
當將電源線路連接至散熱器的PCB上時，請按住散熱器上部的半透明的COVER來進行操作。
【以下事項不屬於保固範圍之內】
使用錯誤的方法進行操作，或是用於指定用途之外時。
在規定的正確操作方法之外時。〈例如：超頻〉
主機板等部份的規格不適合，所引起無法進行安裝。
因他產品的影響引起故障發生時。
使用時將本產品進行改裝。
因本產品的不良引起他產品的故障，破損。
因災害〈地震、打雷、火災、水災〉等引起的故障。
產品本身之保固貼紙被撕毀或破損時。