Installation Instructions For Amd Athlon Xp Clip - Gigabyte 3D Rocket Cooler PRO GH-PCU22-VG Guia De Instalacion

Installation Instructions for AMD Athlon XP Clip

Figure 1
Please add an adequate layer of heat sink paste on the surface
of the CPU. The picture on the right shows the three insert
Figure 1
spaces on the cooler bracket where the CPU clips attach.
A
Figure 2
B
Place point A of the clip (Figure2-1)on point B at the bottom of
the cooler(Figure2-2).Aa Figure 2-3.
Figure 2-1
Figure 2-2 Figure 2-3
Figure 3
Align the three spaces on the cooler with the three clips on the
base of the CPU and make sure point A of the clip(Figure 2-1) is
placed on point B at the bottom of the cooler(Figure 2-2) and
Figure 3
push down on the clip until it' s firmly locked.
Figure 4
Connect the yellow 3-pin connector wire of the cooler to the
CPU fan connector located on the motherboard.
Clip Installation is now complete.
Figure 4
Note: Please refer to page 14 & 15 for power installation
and installation of the fan speed controller.
- 13 - GH-PCU22-VG