LaserLiner BoreScope-Camera Manual Del Usuario página 6

Focal depth
2
The BoreScope-Camera delivers sharp images in a range between 1,5 and 5 cm
from the camera head.
Objects well beyond the focus range may appear blurred.
Instructions for use
• It is absolutely vital to ensure that the BoreScope-Camera does not come
into contact with chemicals, current, moving or hot objects. This can
damage the device and put its user at risk of serious injury.
• The camera head is not acid-resistant or reproof.
• The BoreScope-Camera must not be used for medical examinations /
examining people.
• The unit is not suitable for taking measurements close to dangerous voltages.
Therefore always make sure that conductive parts are at zero potential when
carrying out measurements in the vicinity of electrical systems. Safe isolation
from the power supply and precautions to prevent systems being switched on
again must be ensured by implementing suitable measures.
• Clean the stainless steel guide with a damp cloth before placing it in the
case.
06
GB
< 1,5 cm
1,5 - 5 cm
> 5 cm