Eldom breeze WG52C Manual De Instrucciones página 11

USE AND INSTALLATION OF THE DEVICE
Before the first use, unpack the unit and put particular elements together.
fig. 2
fig. 4 fig. 5
- Couple the arm (G) with the body (M) together with the shank (H). To do the above,slide
the arm into the shank (if it is necessary loosen the lock (K)) and lock it bytightening the
lock (K).
- Unscrew the nuts (B,D) from the body's shaft (M).
- Fix the rear protective mesh (A). Adjust the holes in the mesh to the clamps of the body,
fig. 04.
- Fix the nut (B), twisting it clockwise, fig. 5.
- Slide the airscrew (C) on the pin, fig. 6.
- Secure the airscrew with the nut (D), twisting it counterclockwise, fig. 7.
- Fix the front protective mesh (E). Couple both meshes in the bottom part due to a bolt,
protect by clamps, fig. 8 and 9.
- Put the unit on a stable and even surface.
- Set the height. Loosen the ring (I), slide into shaft into required height.
Lock by twisting the ring (I).
Select the fan rotation speed (press "1", „2" or "3") with the switch (N). After pressthe "0"
position, the appliance is turned off.
Undependably on selected speed, it is possible to select the circulation option after pressing
the button (L).
To switch the above function off, pull the button out (L).
fig. 6 fig. 7
fig. 3
fig. 8
FOT. 2
fig. 9
11 EN