Tabla de contenido
Publicidad
15.) Attach the SHIELD by squeezing the mounting springs together and inserting
the springs into the spring guides in the FAN.
FAN
Installation For New
Construction Framing
NOTE: Even with new construction, you can use the SheetLock
method; however, ReVent
builders would be more familiar with, as outlined in this section.
WARNING: Disconnect all AC Power Breakers or Fuses before attempting
to cut into your ceiling.
1.) Select a set of holding tabs, depending on the thickness of your sheetrock. In
the ceiling,
/
inch sheetrock is the most common.
5
8
/
in (1.3 cm)
1
2
holding tab
2.) Bend the holding tabs you selected outward.
®
/
in (1.6 cm)
5
8
holding tab
can still be installed using a method home
final
5
securing
tab
15
ceiling
spring guide
TRIM RING
mounting springs
/
in (1.3 cm)
1
2
holding tab
/
in (1.6 cm)
8
holding tab
SHIELD
installation
®
Publicidad
Capítulos
Tabla de contenido
