natec FALCON Manual Del Usuario página 2

SPECIFICATION
Sensor type
Resolution
Number of buttons
Dimensions
Power supply
Frequency band: 2402 MHz – 2480 MHz
Maximum radio-frequency power: 3.40 dBm
INSTALLATION
PAIRING A NEW DEVICE WITH MOUSE
IN BLUETOOTH MODE
Move the ON/OFF switch located at the bottom of the mouse to ON
position
Turn ON Bluetooth in device which you want to pair with the mouse
Use the button for changing the channel located on the bottom of
the mouse, select the channel BT1 or BT2 and then hold down the
same button for about 5 seconds to enter into pairing mode. The
LED diode will start flashing rapidly
Then go to the Bluetooth settings on your device and select from
the list of mouse Natec Falcon
After successful pairing, the LED on the mouse will start flash
slowly
The mouse is ready for use
CONNECTING THE MOUSE WITH
THE PREVIOUSLY PAIRED DEVICE
Turn ON Bluetooth on your device that you have
previously paired with the mouse
Turn ON or wake up the from hibernation
The mouse will automatically connect with the device
PACKAGE CONTENT
Falcon optical mouse
Quick installation guide
SAFETY INFORMATION
Use as directed.
Non-authorized repairs or taking the device to pieces
make the warranty void and may cause the product
damage.
Avoid to hit or friction with a hard object, otherwise it will
lead to grind surface or other hardware damage.
Do not use the product in low and high temperatures, in
strong magnetic fields and in the damp or dusty
atmosphere.
Do not drop, knock, or shake the device. Rough handling
can break it.
Slots and openings in the case are provided for
ventilation and should not be obscure. Blocking the vents
can cause overheating of the device.
Optical
800 - 3200 DPI
6
119 x 77 x 47 mm
DC 5V/0,5A
REQUIREMENTS
PC or compatible device with a USB port
Windows® XP/Vista/7/8/10, Linux, Android
FEATURES
Precise optical sensor
Triple modes communication
Smart energy saving technology
Ergonomic shape
CONNECTION OF MOUSE VIA USB RECEIVER
Turn ON your computer or other compatible device
Make sure the ON/OFF switch located at the bottom of
the mouse is in the ON position
Use the button for changing the channel located on the
bottom of the mouse and select the channel indicated
with USB receiver symbol
Connect receiver to a free USB port on your computer
The operating system will automatically install the
required drivers
The mouse is ready for use
Note:
The device is equipped with intelligent technology for
energy management. When the mouse enter into
hibernation (sleep) mode, press any button of the mouse
for its revival.
The mouse is equipped with an ON/OFF switch to save
the battery power when not in use for longer period.
CHARGING
Connect the included micro USB cable to the mouse
Connect USB plug to a suitable power source
Note: Mouse can be used during charging.
Attention: Please charge the battery every 3 months, if
mouse is not in use. Storing the mouse with low battery
power for longer time may damage the battery.
WARRANTY
GENERAL
The safe product, conforming to the EU requirements.
The product is made in accordance with RoHS European
standard.
The WEEE symbol (the crossed-out wheeled bin) using indicates
that this product in not home waste. Appropriate waste
management aids in avoiding consequences which are harmful
for people and environment and result from dangerous materials
used in the device, as well as improper storage and processing.
Segregated household waste collection aids recycle materials
and components of which the device was made. In order to get
detailed information about recycling this product please contact
your retailer or a local authority.
Hereby, IMPAKT S.A. declares that that the radio equipment type
NMY-1610 is in compliance with Directives 2014/53/UE (RED)
and 2011/65/UE (ROHS). The full text of the EU declaration of
conformity is available via the product tab at www.impakt.-
com.pl.
2 years limited manufacturer warranty
EN