sunjoe 24V-DD-CT Manual Del Operador página 2

6. Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to be
performed – Use of the power tool for operations different
from those intended could result in a hazardous situation.
Battery Tool Use and Care
1. Recharge only with the charger specified by the
manufacturer – A charger that is suitable for one type
of battery pack may create a risk of fire when used with
another battery pack.
2. Charge internal battery at ambient temperatures
between 50ºF – 104ºF (10ºC – 40ºC).
3. Under abusive conditions, liquid may be ejected from the
battery; avoid contact. If contact accidentally occurs,
flush with water. If liquid contacts eyes, seek medical help
– Liquid ejected from the battery may cause irritation or burns.
4. Use power tools only with specifically designated
battery packs – Use of any other battery packs may
create a risk of injury and fire.
5. When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys, nails,
screws or other small metal objects, that can make a
connection from one terminal to another – Shorting the
battery terminals together may cause burns or a fire.
Service
1. If your power tool requires service, contact an
authorized Snow Joe
Snow Joe + Sun Joe
®
1-866-SNOWJOE (1-866-766-9563) – Only identical
replacement parts should be utilized for repairs. This will
ensure that the safety of the power tool is maintained.
2. If the battery charger cable is damaged, it must be
immediately replaced to avoid a hazard – Contact
the Snow Joe + Sun Joe
®
1-866-SNOWJOE (1-866-766-9563) for assistance.
Safety Rules for Cordless
Drill/Driver
1. Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory
may contact hidden wiring – Cutting accessory
contacting a "live" wire may make exposed metal parts
of the power tool "live" and could give the operator an
electric shock.
2. Know your power tool. Read operator's manual
carefully. Learn its applications and limitations, as well
as the specific potential hazards related to this power
tool – Following this rule will reduce the risk of electric
shock, fire, or serious injury.
3. Make sure approved eye protection is being worn
and properly adjusted and secured at all times the
drill/driver is being used – There is a possibility that
small pieces of metal could shear off from over-tightened
screws while using the tool.
+ Sun Joe dealer or call the
® ®
customer service center at
®
customer service center at
®
4. Protect your lungs. Wear a face or dust mask if the
operation is dusty – Following this rule will reduce the
risk of serious personal injury.
5. Protect your hearing. Wear hearing protection during
extended periods of operation – Following this rule will
reduce the risk of serious personal injury.
6. Battery tools do not have to be plugged into an
electrical outlet; therefore, they are always in
operating condition. Be aware of possible hazards
when not using your battery tool or when changing
accessories – Following this rule will reduce the risk of
electric shock, fire, or serious personal injury.
7. Do not place battery tools or their batteries near fire or
heat – This will reduce the risk of explosion and possibly injury.
8. Do not crush, drop or damage battery pack. Do not
use a battery pack or charger that has been dropped
or received a sharp blow – A damaged battery is subject
to explosion. Properly dispose of a dropped or damaged
battery immediately.
9. Batteries can explode in the presence of a source
of ignition, such as a pilot light – To reduce the risk of
serious personal injury, never use any cordless product
in the presence of open flame. An exploded battery can
propel debris and chemicals. If exposed, flush with water
immediately.
10. Do not charge battery tool in a damp or wet location –
Following this rule will reduce the risk of electric shock.
Battery + Charger
Safety Instructions
NOTE: This unit is the tool only. The battery and the charger
are not included. They must be purchased separately.
Model 24V-DD-CT is compatible with the iON+ 24V System
batteries and chargers. See page 14 for more information.
We pay a great deal of attention to the design of every battery
pack to ensure that we supply you with batteries that are safe,
durable and have a high energy density. The battery cells have
a wide range of safety devices. Each individual cell is initially
formatted and its electrical characteristic curves are recorded.
This data is then used exclusively to be able to assemble the
best possible battery packs.
Despite all the safety precautions, caution must always be
exercised when handling batteries. The following points must
be obeyed at all times to ensure safe use. Safe use can only
be guaranteed if undamaged cells are used. Incorrect handling
of the battery pack can cause cell damage.
IMPORTANT! Analyses confirm that incorrect use and poor
care of high-performance batteries are the main factors
responsible for personal and/or product damage.
m
WARNING!
Use only approved replacement batteries;
other batteries may damage the cordless drill/driver and cause
it to malfunction, which can lead to serious personal injury.
2