Conceptronic CIS525U Guía De Instalación Rápida página 7

ENGLISH
Note: If you bought the CIS525U with a device pre-installed, you can skip this step and
continue to chapter 3.
A. Remove the 4 screws at the back of the CIS525U and remove the back plate.
B. Gently slide the tray out of the housing.
In the tray, there are connections for an IDE or SATA device.
C. Slide the device into the CIS525U through the front.
D. Select the connection (IDE or SATA) which corresponds with the device which you want
to use and connect them to the device.
2. Hardware Assembly
7