Troubleshooting - Kalorik WCL 47492 S Manual De Instrucciones

TROUBLESHOOTING

Symptoms
–
–
Appliance is not
running
–
–
Vibrations
–
–
–
Temperature
inside not cold
enough
–
–
–
–
–
–
–
Door will not
close
–
–
–
LED Light does
–
not work
–
www.KALORIK.com
Possible cause
No power
Not plugged to power
supply
Voltage does not match the
appliance's
Fuse is broken
Beverage Center is not level
The cooler is placed too
close to a heat source.
The bottles in the cooler
were just added to the
cooler
The door is not closed tightly
or opened too frequently or
for too long time
The door gasket does not
seal properly.
Abnormal voltage
High ambient temperature
Beverage Center is not level
The door is not installed
properly
The gasket is dirty, shifted, or
damaged
The shelves are not
positioned correctly
Content in the appliance is
preventing door from closing
Not plugged in
LED lights are broken
The light button is "OFF"
Plug appliance to power
–
outlet
Check socket is not
–
tripped
Check voltage
–
Contact customer service
–
Check to assure that the
–
appliance is level
Adjust feet accordingly
–
Keep the cooler away
–
direct sunlight or other
heat sources
Give it time for the bottles
–
to cool to the desired
temperature
Change the gasket
–
Maintain door closed for
–
an extended period
Make sure the room is not
–
more than 90ºF above the
target temperature
Check to assure that the
–
Beverage Center is level,
adjust feet accordingly
Check the gaskets
–
Check shelves and,
–
rearrange protruding
bottles
Plug in appliance
–
Check socket is not tripped
–
Change the LED lights.
–
Press the light button ON
–
12
Solutions
WCL 47492 S - 200605