Troubleshooting - Kalorik WCL 44447 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

TROUBLESHOOTING

Symptoms
Possible cause
No power
Not plugged to power
Appliance is not
supply
running
Voltage does not match
power supply
Fuse broken
Vibrations
Wine chiller is not level
The cooler is placed too
close to a heat source;
The bottles in the cooler
were just added to the
Temperature
cooler
inside not cold
Bad ventilation
enough
Fans don't work
The door is not closed tightly
or opened too frequently or
for too long time
The door gasket does not
seal properly.
Abnormal voltage
High ambient temperature
Wine cooler is not level
The door is not installed
properly
The gasket is dirty, shifted or
Door will not
damaged
close
The shelves are not
positioned correctly
Content in the appliance is
preventing door from closing
Not plugged in
LED Light does
Fuse broken
not work
LED lights are broken
The light button is "OFF"
Solutions
Plug appliance to power
outlet
Check socket is not
tripped
Check voltage
Contact customer service
Check to assure that the
appliance is level
Adjust feet accordingly
Keep the cooler away
direct sunlight or other
heat sources
Give it time for the bottles
to cool to the desired
temperature
Place the cooler in the
area with good ventilation
do not obstruct the fans
Fan may need to be
replaced. Please contact
customer service
Change the gasket
Maintain door closed for
an extended period
Make sure the room is not
more than 30ºF above the
target temperature
Check to assure that the
wine cooler is level, adjust
feet accordingly
Check the gaskets
Check shelves and,
rearrange protruding
bottles
Plug in appliance
Check socket is not
tripped
Press the light button ON
12
WCL 44447/CA WCL 3 SS - 180330

Publicidad

Tabla de contenido
loading

Tabla de contenido