L.B.White L40 Instrucciones De Instalación página 3

4. Connect the blue wires inside the control box with
the wire nuts provided. See Fig. 6.
FIG. 6
5. Install the control box cover and screws removed
earlier.
6. Connect the gas hose to the brooder and open the
gas supply valve.
7. Leak check all pipe joints and hose connections.
8. Connect the heater to an approved electrical supply.
9. Position the ON/OFF switch on the heater's control
box to ON ( I ).
10. Check the heater for proper operation.
Installation Instructions •
L40 Blue Wire Service Kit
L40 Blue Wire Service Kit
3