Linksys Wireless Serie Guía De Instalación Rápida página 6

E. You will determine where the Wireless CompactFlash Configuration
Utility will be installed. If you would like the utility files installed in the
default directory, click the Next button. If you would like to choose an
alternate directory, click the Browse button, and select the appropriate
folder. Then click the Next button.
E
F. Choose either Infrastructure mode or Ad-Hoc mode, depending on your
needs. If you are unsure whether to choose Infrastructure or Ad-Hoc, refer
to the User Guide on the Setup CD-ROM for more information. Once you
have made your choice, click the Next button.
F
6
Instant Wireless ® Series
Wireless CompactFlash Card
G.1 If you chose Infrastructure Mode, go to Step G.2 now. If you chose Ad-
Hoc Mode, select the correct operating channel that applies to your
network. The channel you choose should be the same as the channel for the
other computers and devices in your wireless network. Channel 11 is the
default. Select the appropriate channel, and click the Next button.
G.
1
G.2 Enter your wireless network's SSID. The SSID must be identical for all
points in the network. The default setting is linksys (all lowercase). Enter
this information, and click the Next button.
G.
2
7