Linksys Wireless Serie Guía De Instalación Rápida página 8

Step 2: Installing the Wireless
CompactFlash Card
A. Insert the Wireless CompactFlash Card into your PDA.
A
B. The screen in Figure B
will appear. The default
setting is Use server-
assigned IP address.
In most cases, you
should keep the default
setting. However, if you
are using fixed IP
addresses on your
wireless network, then
click the radio button
next to Use specific IP
address, and complete
the IP address, Subnet
mask, and Default
gateway fields.
B
10
Instant Wireless ® Series Wireless CompactFlash Card
C. Click the OK button to close the screen shown in Figure B.
D. Make sure the icon shown in Figure D1 is displayed in
your PDA's system tray (see Figure D2).
D
2
The installation of the Wireless CompactFlash Card is complete.
D
1
11