Cleaning And Maintenance - cecotec READYWARM 6350 CERAMIC TOUCH CONNECTED Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 12
ENGLISH
mode.
Fan mode: Blue light indicator
Low heat mode: Light red light indicator
High heat mode: Red light indicator
Press the oscillation button to activate the 75º oscillation function.
Use the temperature + or temperature – buttons to set the desired temperature, from 16 ºC to
37 ºC.
Hold down the mode button for 5 seconds to activate the timer function. Then, use the
temperature + or temperature – buttons to set the timer. It can be set up to 9 hours, and the
device will automatically turn off after the set time. The display will blink 3 times when the
timer is set.
The product will keep running a few seconds after turning off.
The display will turn to low light automatically after 100 seconds.
Remote control operation
Plug the device's power cord into an electrical outlet.
Turn on the main switch at the back of the device.
Press the on/off button to start the heater and press the mode button to select the desired
mode.
Fan mode: Blue light indicator
Low heat mode: Yellow/orange light indicator
High heat mode: Light red light indicator
Press the oscillation button to activate the 75º oscillation function.
Use the temperature + or temperature – buttons to set the desired temperature, from 16 ºC to
37 ºC.
Press the timer button and use the temperature + or temperature – buttons to set the timer.
It can be set up to 9 hours, and the device will automatically turn off after the set time. The
display will blink 3 times when the timer is set.
Press the light button to control the 3-colour indicator light.
App and Wi-Fi operation
The device can be operated and controlled from a Smartphone App.
Download the App from Apple Store or Google Play. The name of the App is EnergySilence.
Open the App, tap on Register and accept the Privacy Policy.
Enter your e-mail.
Select your country and tap on "get verification code". You will receive an e-mail with a
verification code, which you will have to enter in the App.
Within 60 seconds, enter this verification code, choose a password and select confirm to
confirm the registration.
In order to use the App, select Add Device and select your heater.
Turn the heater on. The light indicator on the right bottom corner should start blinking. If it is
READYWARM 6350 CERAMIC TOUCH CONNECTED
30
not, hold down the on/off button until the light indicator blinks.
When the light indicator in the heater screen is blinking rapidly, select in the App: Confirm
indicator rapidly blinks.
Enter the correct Wi-Fi password.
The device will be connected to the smartphone App.
Select 'Done' once the connection has been successfully established.
The light indicator on the screen will light up.
Select Modify Device Name and select a name for your heater.
The product will now be ready to use.
Connection under slow blinking
If the device cannot connect under fast blinking:
Hold down the on/off button until the light indicator blinks slowly. Select Confirm indicator
slowly blinks on the App.
Enter the correct Wi-Fi password.
Follow the instructions show on the App until AP mode connects successfully. If the
connection is successful, light indicator on the heater screen will remain on.
Wi-Fi connection
Hold down the temperature + button and the oscillation button for 3 seconds to turn the Wi-
Fi on or off.

4. CLEANING AND MAINTENANCE

Disconnect the appliance from the power supply, turn it off and allow it to cool down before
cleaning or storing it.
Use a soft, damp cloth to clean the product's surface.
Clean dust from the device's surface and vents regularly.
Clean and store the device in a safe, dry place if it is not going to be used for a long period of
time.
Do not immerse heater in water or allow water to drip into the interior of the heater, as this
could create an electric shock hazard.
Avoid the use of abrasive cleaning agents or scouring pads as these could damage the
product.
The power cord should not be in contact with sharp edges, and it should not be compressed
by heavy objects. Store the cord in a clean, dry location always away from metal objects.
Always check the plug before use to assure metal items haven't become attached.
Do not place any heavy items on top of appliance during storage as this may result in
possible damage of appliance.
ENGLISH
READYWARM 6350 CERAMIC TOUCH CONNECTED
31

Publicidad

Tabla de contenido
loading

Tabla de contenido