Rollei Hear:Me Pro Manual De Instrucciones página 10

Function and Operation
10
1.3 Attach the microphone to a camera or
camcorder.
1.3.1 Insert the microphone into the hot
shoe of the camera. Tighten it by rotating
the fixing screw.
1.3.2 Insert the 3.5 mm audio cable into
the microphone and the camera.
2. Operation
2.1 Low-cut filter function
To use the low-cut filter put the switch to
the right position.
Note: This function filters background fre-
quencies lower than 80 HZ, such as unwanted
noise produced by wind, focusing, traffic, etc.
Furthermore please note that this function also
can effect your recording. So we recommend
only to use this function if it is needed.
ENGLISH