Concept VP4205 Manual De Instrucciones página 30

EN
OPERATION
(of the whole appliance with an inserted hand vacuum cleaner)
Press the button for the first time to turn on the vacuum cleaner
with lower suction power. Press the button second time to
switch the vacuum cleaner to higher suction power. Press the
button third time to turn the vacuum cleaner off.
Once the hand vacuum cleaner is inserted into the body of the
main vacuum cleaner, this button has no function.
OPERATION
(mop function)
Put the suction nozzle
on the water tank.
58
If you press this
button, the water
from the water tank
will moisten the mop.
You can add
water through this
opening.
VP4205 | VP4210
OPERATION
(emptying the dirt container)
1
Press the bottom button.
3
Remove the filter.
OPERATION
(cleaning)
1
Remove the filter with the holder.
3
Remove the rotary brush.
If hair gets on the brush, remove the centre rod and use a knife or
scissors to cut hair and clean the rod.
VP4205 | VP4210
EN
2
Release the dirt container.
4
Empty the dirt container.
2
Clean the filter and the holder, both are washable.
4
Clean the rotary brush.
59