Removing The Seat - Kohler C3-430 K-27142-CR-0 Manual Del Usuario

Removing the Seat

For Cleaning
IMPORTANT! When removing the seat for cleaning, take care to
avoid exerting any force on the hose connections.
Press and hold the release button.
Tilt the seat up and lift to remove. Avoid putting pressure on the
hoses.
Clean the area as needed.
To reinstall, engage the rear edge of the seat with the lip on the
mounting bracket. Then tilt the seat down to lock into place.
For Servicing
Turn off the water at the supply stop.
Flush the toilet to relieve any pressure from the supply hose.
Unplug the power cord from the electrical outlet.
Disconnect the water supply hose from the T-valve.
Press and hold the release button.
Tilt the seat up and lift to remove.
When servicing is complete, reinstall the seat and reconnect all
components.
1354689-5-A
Release
Button
Mounting
Plate
12 Kohler Co.