Components; Correct Use; General Safety Instructions - Meister I-DRILL MAS 12ib Traducción De Las Instrucciones De Servicio Originales

5450480-Akku-Schra-man.qxd
Noise/vibration information
Measured values determined in
accordance with EN 60745-1:2009,
EN 60745-2-2:2003+A11:2007.
The specified vibration emission value
was measured in accordance with a
standardised test procedure and can be
used in order to compare one electrical
tool with another.
The specified vibration emission value
can also be used for preliminary
evaluation of the disturbance.
CAUTION! The vibration emission
value may fluctuate from the
specified value during use of the
electrical tool. These fluctuations will
depend on the way in which the tool is
used.
Safety measures must be taken in
order to protect the operator. As a
result, the evaluation of the
disturbance must be made whilst
taking account of the actual conditions
of use. (All parts of the operating cycle
must be taken into account for this
purpose. This also includes times in
which the tool is switched off and
times in which it is switched on, but is
running without load.)
3 – Components
1 Drill chuck
2 Torque setting
3 On/off switch with integrated light
switch and rotation speed regulation
4 Clockwise/anti-clockwise running
5 Rechargeable battery
6 Charging unit
7 Charge control
8 Charging shaft
9 LED work light
03.08.2010 12:19 Uhr
10 Rechargeable battery display
11 HI/LO switch
4 – Correct use
Drilling in wood and metal, screw-
driving. Employ the machine, charging
unit and accessories (follow
manufacturer's directives!) for specified
area of application only! All other
applications are explicitly excluded.
The machine is intended only for use in
the household.
5 – General safety
Failure to follow the warnings and
instructions may result in electric shock,
fire and/or serious injury.
Save all warnings and instructions for
future reference.
The term "power tool" in the warnings
refers to your mains operated (corded)
power tool or battery-operated
(cordless) power tool.
This unit may not be used by people
(including children) with reduced
physical, sensory or mental capacities,
with a lack of experience and without
the appropriate knowledge, unless they
are supervised by someone who is
responsible for their safety or have been
instructed by such a person with regard
to how the unit is to be operated.
Children should be supervised to
ensure that they do not play with the
device.
Seite 63
instructions for handling
power tools
WARNING! Read all safety
warnings and all instructions.
63