Battery Installation - Ega Master 57542 Manual De Instrucciones

- Remove the battery cap.
- Insert the batteries matching the -/+ polarities of the battery to the battery compartment.
- Put on the battery cap and rotate it tightly according to the following figures.
- Press to power on the digital torque wrench.
- Usually press to reset the digital torque wrench before using it.
ATTENTION:
If an external force is applied to the torque wrench during power-on/reset or wake up period,
an initial torque offset will exist in the memory.
The wrench will auto sleep after about 5 minutes idle for power saving. Press
the wrench during the sleep mode.
CAUTIONS:
During communication period (Send appears), the sleep function is disabled.
BEFORE USING THE WRENCH

BATTERY INSTALLATION

POWER ON AND RESETTING THE WRENCH
ACTIVATION DURING SLEEP MODE
to wake up
23