- DO NOT use ordinary steel wool or steel brushes. Small bits of steel may adhere to the
surface causing rust.
- DO NOT allow salt solutions, disinfectants, bleaches, or cleaning compounds to remain
in contact with stainless steel for extended periods. Many of these compounds contain
chemicals that may be harmful. Rinse with water after exposure and wipe dry with a clean
cloth.
Painted surfaces should be cleaned with warm water and mild detergent only.
• Replacing the aluminum panels:
To replace the aluminium panels, simply pull handleas shown in Fig.9.
• Replacing bulbs:
To replace the bulbs, rotate the lamp
anticlockwise as shown in Fig..
Replace the bulbs with new ones of the
same type. (LED LAMP 5W GU10)
- 24 -