GMI V!SA Manual De Instrucciones página 61

Fig. 4.2 Filter and Cover Removed
2) Fit a new Sensor Grille Filter (Part No. 66083), if
required.
Note: The filter is keyed and therefore can only be
fitted in one direction.
3) Replace the sensor cover assembly by first
positioning the location feet, then pressing the cover
down on to the filter.
4) Replace and secure the cover screw, in a clockwise
direction, using the Battery / Sensor Grille Key
(Part No. 66166).
Note: Care must be taken not to overtighten the
cover screw.
OPERATOR MAINTENANCE
4-3