GMI V!SA Manual De Instrucciones página 65

Note: If re-fitting the same filter, make sure that filter
direction of flow orientation is maintained. This can
be easily identified by position of yellow label on
filter, i.e. facing instrument.
2) Fit a new In-line Hydrophobic Filter (Part No. 66484).
Note that the filter should be fitted with the yellow
label facing the instrument.
3) Attach the luer fitting, with sample line attached, to
the mating side of the filter then tighten in a clockwise
direction to secure. Do not overtighten the fitting.
4) Attach the sample line to the other side of the filter
making sure that it is securely fitted.
OPERATOR MAINTENANCE
4-7