LAZBOY La-Z-Touch Instrucciones De Operación página 5

Thermo-Electric Cooler Recliner with 2-Motor
Massage & Heat Assembly Instructions:
6. Identify the four electrical connectors at the back of the chair, under the seat (F
• The two rectangular connectors are for the hand wand connection (F
• The round connector is for the 2-motor massage and heat power
transformer connection (F
IGURE
• The black rectangular connector is for the thermo-electric cooler
power transformer connection (F
7. Align the two rectangular hand wand connectors (some of the connector pins are
square, others are round). Push the connectors together until they lock (F
8. Plug the 2-motor massage and heat power transformer into the round connector.
Make sure the connectors are securely fastened (F
9. Plug the thermo-electric cooler power transformer into the black rectangular
connector clamped to the inside arm. Push the connectors together until they
lock (F 9).
IGURE
WARNING
– To reduce the risk of serious injur y:
• Check the condition of the power transformers, electrical cords, plugs and
connectors monthly. Keep the power transformers and electrical cords away
from heat sources. Never operate the unit with a damaged power transformer,
electrical cord, plug or connector. Contact your La-Z-Boy
• Do not allow electrical cord to be pinched between moving parts or
between the frame and the floor. Do not place cord under carpet
or in location where it could become worn.
10. Move the cords away from the base and hold the top arm closed to prevent the
cooler from falling out. Gently return the chair to the upright position. Make sure the
cords are not pinched in moving parts or under the base.
WARNING
– To reduce the risk of serious injur y:
• Provide a clear path for operation of the back and legrest. Place tables
and area rugs at a distance to allow the legrest to fully extend without
rubbing or interference.
11. Choose a location for the chair that is close to an electrical outlet.
Proceed to the Operating Instructions.
NOTICE:
To prevent damage to the connectors and cords, it is
important to unfasten all connections prior to removing the back.
12. To remove the back, unplug the power transformers from the electrical outlet and
reverse the Assembly Instructions steps.
8
8).
9).
IGURE
8).
IGURE
® dealer for service.
Thermo-Electric Cooler Recliner with 2-Motor
Massage & Heat Assembly Instructions:
7).
IGURE
8).
IGURE
F 7
IGURE
8).
IGURE
Thermo-Electric Hand Wand
Cooler Power Connectors
Transformer
Connector
F 9
IGURE
Thermo-Electric Cooler Power
Transformer Connectors
F 8
IGURE
Massage & Hand Wand
Heat Power Connectors
Transformer
Connector
F 10
IGURE
Thermo-Electric
Cooler Power
Transformer
Massage & Heat
Power Transformer
Connectors
Massage & Heat
Power Transformer
9