Ingersoll Rand EL 230V Serie Especificaciones Del Producto página 3

Model
lbs.
EL1510E–E 1.6
EL1510E–U 1.6
EL2607E–E 1.6
EL2607E–U 1.6
EL4004E–E 1.6
EL4004E–U 1.6
EL1510E–E 1.6
EL1510E–U 1.6
EL2607E–E 1.6
EL2607E–U 1.6
EL4004E–E 1.6
EL4004E–U 1.6
EL1510E1S5–E 2
EL1510E1S5–U 2
EL1510E2S3–E 2.2
EL1510E2S3–U 2.2
EL1510E2S5–E 2.2
EL1510E2S5–U 2.2
EL4004E2S3–E 2.2
EL4004E2S3–U 2.2
EL4004E2S5–E 2.2
EL4004E2S5–U 2.2
Torque Adjustment
To adjust the torque on these screwdrivers, proceed as follows:
1. Determine the torque output of the tool by checking a tightened fastener with a torque wrench.
2. Increase or decrease the torque output by rotating the Spring Adjusting Ring. Rotating the Ring clockwise to a higher number on the
Torque Scale increases torque output while rotating the Ring counterclockwise to a lower number decreases the torque output.
The numbers from one to five on the Torque Scale are reference numbers only and are not an indication of actual torque output.
3. Check the adjustment with a torque wrench. A number of factors will affect torque output from one job to another. Final torque adjustment
should be made at the job through a series of gradual increases. Always start below the desired torque and work upward.
Routine Maintenance
General Instructions:
Maintenance and repairs should be made only by authorized trained personnel; when such service or repair is required for these tools, contact
the nearest Ingersoll Rand Authorized Service Center.
For Authorized Trained Personnel:
For 'Assembly / Disassembly' and other maintenance instructions regarding these products, see Maintenance Information Manual 16575300 (EL,
EP and ET 230V Series), located at www.ingersollrandproducts.com, or contact the nearest Ingersoll Rand Office or Distributor.
Disconnect the tool from the power source before making any adjustments, changing accessories, or storing the tool. Such preventive
safety measures reduce the risk of starting the tool accidentally.
16578650_ed1
Weight Length
Kg. in. mm
STRAIGHT SCREWDRIVERS
0.73 10.8 274
0.73 10.8 274
0.73 10.8 274
0.73 10.8 274
0.73 10.8 274
0.73 10.8 274
0.73 10.8 274
0.73 10.8 274
0.73 10.8 274
0.73 10.8 274
0.73 10.8 274
0.73 10.8 274
ANGLE SCREWDRIVERS, ANGLE WRENCHES
0.91 17.5 444
0.91 17.5 444
1 17.6 447
1 17.6 447
1 17.6 447
1 17.6 447
1 17.6 447
1 17.6 447
1 17.6 447
1 17.6 447
Drive Size
Sound Pressure Level dB (A)
(ANSI S5.1 1971)
in.
1/4 hex
1/4 hex
1/4 hex
1/4 hex
1/4 hex
1/4 hex
1/4 hex
1/4 hex
1/4 hex
1/4 hex
1/4 hex
1/4 hex
1/4 square
1/4 square
1/4 hex
1/4 hex
1/4 square
1/4 square
1/4 hex
1/4 hex
1/4 square
1/4 square
NOTICE
CAUTION
NOTICE
WARNING
Vibrations Level
m/s
2
70.7
70.7
61.7
61.7
70.7
70.7
70.7
70.7
61.7
61.7
70.7
70.7
70.7
70.7
70.7
70.7
70.7
70.7
70.7
70.7
70.7
70.7
EN
(ISO28927)
< 2.5
< 2.5
< 2.5
< 2.5
< 2.5
< 2.5
< 2.5
< 2.5
< 2.5
< 2.5
< 2.5
< 2.5
< 2.5
< 2.5
< 2.5
< 2.5
< 2.5
< 2.5
< 2.5
< 2.5
< 2.5
< 2.5
EN-2