Operation; Powering On/Off - Waeco ST-8810 Instrucciones De Uso

ST-8810
4 Measuring indication
5 Data hold
4

Operation

4.1

Powering On/Off

➤ Press the "On/Hold" button to power on the thermometer.
➤ Release the "On/Hold" button to read the display.
➤ Read the measured temperature on the display (fig. 4).
The thermometer automatically powers off approximately 7 s after pressing
one of the buttons.
4
4.2 Selecting temperature unit (°C/°F)
➤ Press the "On/Hold" button to power on the thermometer.
➤ Press the "°C" button to set the unit to "degrees C" (fig. 5).
➤ Press the "°F" button to set the unit to "degrees F" (fig. 6).
✓ The chosen unit is indicated on the display.
5
EN
9 Backlight
6
Operation
19