Cleaning And Maintenance; Environmental Protection; Accessories And Spare Parts - Würth 0772 122 Traducción Del Manual De Instrucciones De Servicio Original

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 20
Malfunction
Reverse connection LED [2] lights red.
Charge indicator [1] lights red.
No output voltage at jack at rear side of the
casing.
Jump start procedure not possible.

Cleaning and maintenance

Important!
The device may only be cleaned with
the mains plug disconnected.

Environmental protection

Do not dispose of the device with
domestic waste. Have the device
disposed of by an authorised waste
management company or your
municipal waste management
organisation. Adhere to the applica-
ble regulations. In case of doubt
contact your waste management organisation.
Recycle all packaging material in an environmentally
friendly manner.
Batteries:
Do not dispose of batteries with domestic waste,
do not expose to fire or water. Collect and recy-
cle batteries or dispose of with due care for the
environment.
10
Notes on troubleshooting
Cause
– Booster cable clamps are connected incorrectly.
– Charge level of device battery too low
– Charging not possible.
– Charge level of device battery too low
– Charge level of device battery too low.
– fuse integrated into the device defective.
For this Würth appliance the following guarantees
apply:
– Battery booster kit and charger: 24 months
– Battery in battery booster kit: 12 months
– Cable clamps and fuses are excluded as they are
The warranty period starts with the date of purchase
(verified by invoice or delivery document).
Faults covered by warranty shall be eliminated by
replacement or repair. Damage caused by improper
operation is not covered by warranty.
Claims under warranty shall only be considered if
the device is returned fully assembled to a Würth
agency, your Würth sales representative or a
customer service workshop for electrical equipment
authorised by Würth. Technical changes reserved.
We accept no liability for printing errors.
In the unlikely event of a failure or defect, have the
device repaired by a Würth masterService work-
shop. In all your queries and spare part orders,
always quote the product number (see type plate) of
your device.
Warranty
wear parts.

Accessories and spare parts

Publicidad

Tabla de contenido
loading

Tabla de contenido