Kit Assembly - Metra 95-7361S Instrucciones De Instalación

ISO DDIN radio provision
1. Connect the radio brackets to
the radio housing with (4)
#8 x 3/8" Phillips screws supplied.
(Figure A)
2. Slide the radio into the assembly
and secure with screws supplied
with the radio. (Figure B)
3. Locate the factory wiring harness
and antenna plug in the dash.
Metra recommends using the
proper mating adapters from
Metra and/or AXXESS.
4. Mount the new radio assembly into
the dash and reassemble dash in
reverse order of disassembly.

Kit Assembly

(Figure A)
95-7361S
(Figure B)
3