Equipment Identification - IARP RUGIADA WINE&BEER Instrucciones

Modello - Modèle - Model
Modell - Modelo
Fabbricante - Constructeur
Manufacturer - Hersteller
Fabricante
3.

EQUIPMENT IDENTIFICATION

• Located on the plate affixed to the machine to detect the technical data.
• Check the model and power supply voltage before carrying out any operation.
• If discrepancies are found, immediately contact the manufacturer or the company that supplied the
equipment.
1. Manufacturer
2. Code
3. Conformity marking
4. Power supply voltage (V)
5. Power supply frequency (Hz)
6. Absorbed electrical power (W)
7. Absorbed electrical power in
defrosting (W)
8. Light max. power (W)
9. Gross volume
10. Type and quantity of refrigerant
11. Climate class
It is strictly forbidden to remove, tamper with the plate and change or alter the data
contained in it.
4. DISPOSAL OF USED MATERIALS
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE
WITH EC DIRECTIVE 2002/96/EC
At the end of its working life, the product must not be disposed of as urban waste.It must be taken to a
special local authority differentiated waste collection centre or to a dealer providing this service. Disposing
of a household appliance separately avoids possible negative consequences for the environment and
health deriving from inappropriate disposal and enables the constituent materials to be recovered to
obtain significant savings in energy and resources. As a reminder of the need to dispose of household
appliances separately, the product is marked with a crossed-out wheeled dustbin.
The symbol on the product or on the packaging indicates the product must not be considered
normal domestic waste, but must be brought to an appropriate collection point for recycling of
the electrical and electronic equipment. By disposing of this product appropriately, you contribute
to avoiding potential negative consequences, which could derive from inadequate disposal of
the product.
For more detailed information on recycling of this product, contact the municipality office, the
local waste disposal service or the shop where you purchased the product.
The cabinet contains oil, inflammable cooling gas, plastic and metallic components and glass.
WARNING!
Polyurethane insulation uses CICLOPENTHANE as expander, that doesn't affect the environment
but is inflammable. To guarantee the same respect when it's disposed of , never abandon the
equipment outside. Don't throw the packaging material from your equipment in the rubbish
but sort the various materials: eg.polystyrene, cardboard, plastic bags. The demolition of the
cabinet and the recovery of the component materials must be carried out according to the local
regulations in force in this matter.
RUGIADA WINE&BEER
EPTA S.p.A. - Sede legale
Via Mecenate, 86 - 20138 Milano – Italy
Capitale € 68.515.000 - R.E.A./MI – 1730229
Registro delle Imprese e Cod.Fiscale n. 04160730968
Partita IVA 04160730968
1
8
*Example of data plates
Unità Locale
Via A. Grandi, 43 -
15033 Casale Monferrato (AL)
Tel: +39 0142 436111 - Fax: +39 0142 781540
info@iarp.it
6
5
4
7
9
2 5 / 6 4
PAGE
UM000293
N° DOC
2
10
11
11
3