IARP RUGIADA WINE&BEER Instrucciones página 32

Modello - Modèle - Model
Modell - Modelo
Fabbricante - Constructeur
Manufacturer - Hersteller
Fabricante
21. MALFUNCTION AND REMEDIES
Gli inconvenienti di funzionamento che si riscontrano negli apparecchi frigoriferi sono dovuti,
nella maggioranza dei casi ad installazione elettrica difettosa.
Si tratta quindi di cause che possono essere facilmente eliminate sul posto.
Check that the unit is properly plugged
Check that the unit is properly plugged
Check that the plug cord is broken
If power failure is not due to any of the above causes, call the nearest after-sales service immediately,
empty the cabinet and store the foods in coldrooms or refrigerators that may ensure their preservation
temperature.
THE INTERNAL TEMPERATURE IS NOT COLD ENOUGH
Check door is perfectly closed
Make sure that the cabinet has been filled correctly
Check that the unit is not adjacent to sources of heat
Check that behind the cabinet air can properly circulate.
Check the temperature setting
If failure to cool should is not due to any of the above reasons it it persists on even after the above checks,
resort to the nearest after-sales service.
Check that all the bolts and nuts are properly fastened
Check that the unit is placed on an even surface
Check if any pipe or fan is in contact with any other part
of the body
Should the inconvenience persist, contact the nearest after-sales service.
RUGIADA WINE&BEER
EPTA S.p.A. - Sede legale
Via Mecenate, 86 - 20138 Milano – Italy
Capitale € 68.515.000 - R.E.A./MI – 1730229
Registro delle Imprese e Cod.Fiscale n. 04160730968
Partita IVA 04160730968
THE UNIT DOES NOT START
CAUSE
CAUSE
THE UNIT IS NOISY
CAUSE
Unità Locale
Via A. Grandi, 43 -
15033 Casale Monferrato (AL)
Tel: +39 0142 436111 - Fax: +39 0142 781540
info@iarp.it
SOLUTION
Insert the plug
Insert the plug correctly
Replace the plug cable
SOLUTION
Close correctly
Load the product correctly
Position the equipment
correctly
Position the equipment
correctly
Set the correct temperature
SOLUTION
Screw in the screws
Position the equipment
correctly
Switch off the counter and
distance the parts in contact
in the event the problem
persists, contact the support
service.
3 3 / 6 4
PAGE
UM000293
N° DOC
AUTHORISED STAFF
User
User
Technical support
AUTHORISED STAFF
User
User
User
Technical support
User
AUTHORISED STAFF
User
User
Technical support