EAS ELECTRIC EMSG20L Manual De Instrucciones página 28

8.Multi-Stage Cooking
Two stages can be maximum set. If one stages is defrost, it should be put in the first stage
automatically. The buzzer will ring once after each stage and the next stage will begin.
Example: if you want to defrost the food for 5 minutes, then to cook with 80%
microwave power for 7 minutes. The steps are as following:
1) Press "
Peso/Tiempo Descong.
2) Turn " " to adjust the defrost time of 5 minutes;
3) Press "Micro./Grill/Combi. " once;
4) Turn " " to choose 80% microwave power till "P80" display;
5) Press "INICIO/+30SEG./CONFIRM." to confirm;
6) Turn " " to adjust the cooking time of 7 minutes.
7) Press "INICIO/+30SEG./CONFIRM." to start cooking.
9. Pre-set Function
1) Set the clock first. (Consult the instruction of clock setting.)
2) Input the cooking program. Two stages can be set at most. Defrosting should not be
set in preset function.
Example: if you want to cook with 80% microwave power for 7 minutes.
a. Press "Micro./Grill/Combi. " once;
b. Turn " " to choose 80% microwave power till "P80" display;
c. Press "INICIO/+30SEG./CONFIRM." to confirm;
d. Turn " " to adjust the cooking time of 7 minutes;
After the above steps, please do not press " INICIO/+30SEG./CONFIRM ". Then do as
following:
3) Press " RELOJ/TEMPORIZADOR". The hour figures flash;
4) Turn " " to adjust the hour figures, the input time should be within 0--23.
5) Press " RELOJ/TEMPORIZADOR", the minute figures will flash.
6) Turn " " to adjust the minute figures, the input time should be within 0--59.
7) Press " INICIO/+30SEG./CONFIRM. " to finish setting. ":" will light, buzzer will
ring twice when the time arrives, then cooking will start automatically.
Note: clock must be set first. Otherwise,pre-set function will not work.
" twice, the screen will display "dEF2";
28
.