Allsteel AWARE Guia De Instalacion página 5

AWARE RECYCLE CREDENZA
LEVELING THE UNIT.
Step 1: Place a level on the unit to determine if it is leveled.
Step 2: Locate the glides.
Glides are located in the front and rear of the credenza. On a 36" wide credenza, raise the shelf to
access the glides. On a 57" wide credenza, the glides are located under the left and right bay. Re-
move all retaining clips and raise the base shelf, exposing the front and rear glides as well. Use a 1/4"
driver to level the unit accordingly.
Step 3: Adjust the doors.
Doors can be adjusted up or down, left or right and forward or backwards through the hinges. Adjust
doors with a screwdriver until desired results are achieved.
Step 4: Check the level to evaluate that the unit is leveled.
Shelf
343-3773
SCALE 0.250
Shelf Retainers
For in and out
leveling
Leveling glides
Installation Packet
For side to
side leveling
For up and
down leveling
Page 5 of 6