Publicidad
Idiomas disponibles
Idiomas disponibles
Illustration 1
Hangrail
HANGRAILS
Read all instructions and review illustrations
before installing.
Crossrail (optional)
Tools required for assembly:
None
This assembly includes:
Crossrail clip
Hangrail (2 per drawer)
(optional)
Crossrail Clip (optional - 4 per drawer)
Crossrail (optional - 2 per drawer)
The illustration shows the drawer removed, but
installation of hangrails can be done with the
drawer(s) installed. It is not required to remove
drawer(s).
Hangrail and optional crossrail installation
(refer to Illustration 1):
1. Open file drawer completely.
Side of file drawer
2. Install hangrails onto top edge of each drawer
3. Position hangrail clips onto hangrails as
4. Firmly press down on hangrail clips to lock
5. Slide crossrails, forward or rearward, to adjust
NOTE
side.
shown and insert crossrails into notches in
hangrail clips.
clips in place.
placement of crossrails. Adjust placement of
crossrails to the width of the file folders used.
242-7440A
(7/06)
Publicidad
