Metra 95-7879 Instrucciones De Instalación página 5

DDIN mount radio provision
1. Locate the factory wiring harness in the
dash. Metra recommends using the
proper mating adapter from Metra or
AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
2. Slide the Double DIN head unit into the
brackets and secure the Double DIN
head unit to the assembly using the
screws supplied with the radio.
(Figure B)
3. Secure the radio housing brackets to
the radio housing with four #8 x 3/8"
Phillips screws provided. (Figure C)
4. Reassemble dash in reverse order of
disassembly using the supplied
#8 screw in place of the factory screw
removed in step one, figure B of the
dash disassembly.
Kit Assembly 95-7879
5
(Figure B)
(Figure C)