Descargar Imprimir esta página

NVT Phybridge FLEX8 Guía De Instalación Rápida página 2

Publicidad

Q U I CK IN S TAL L G U ID E
FLEX8 SWITCH HARDWARE TOPOLOGY
FLEX8 Managed Switch
To Application
10 Mbps FORCE
Power
LRE/AUTO Mode Toggle
1 RJ45 port: UTP cable (2-pair or 4-pair)
Cable Type
4 pair CAT5e
2 pair CAT5e
1 pair CAT5e*
P o E P O W ER AVA ILA BLE TO F LE X- L I NK, F LEX4, AND F LEX- C
FLEX-Link /FLEX4
20ft (6m)
4-Pair UTP/STP
50W
2-Pair UTP/STP
30W
The FLEX-Link can support up to 50W of power using all 4-pairs or maximum of 30W using 2-pairs. FLEX4 can accept up to 120W of power and it can output up to 30W of power for 802.3af/at compliant devices. To account for cable
losses and increase PoE delivery, the FLEX-Link and FLEX4 adapters have the option of using a local external power supply. The FLEX-Link and FLEX4 are IEEE compliant and will negotiate power with the IP device.
FLEX-C
20ft (6m)
4-Pair UTP/STP
30W
2-Pair UTP/STP
30W
The FLEX-C supports IEEE-compluiant devices and can support up to 30W of power. If additional power is required use the FLEC-Link instead.
TE C H NI C A L S P E C IF I C ATI O N S
Model
Part Number
Dimensions
Weight
Interface: Ethernet Uplink
(Trunk IP)
Interface: Downlink
(PoE and IP to Adapter)
Power Supply
Power Consumption
Power Injection (PoE)
Operating Temperature
Humidity
Specifications subject to change without notice.
888.901.3633 | +44 (0) 208 977 6614 | www.nvtphybridge.com
If endpoint is within 328ft (100m) FLEX
adapter is not required.
WE
1
2 3 4
5 6
7
8
10/100 AUTO
1
3
5
7
2
4
6
8
Data Rate
100 Mbps
100 Mbps
10 Mbps
100 Mbps
10 Mbps
*adapter must be locally powered
250ft (76m)
500ft (152m)
47W
44W
30W
27W
250ft (76m)
500ft (152m)
30W
30W
30W
27W
FLEX8
NV-FLX-08
7.09" x 4.53" x 1.45" (LxWxH); 18cm x 11.5cm x 3.68cm (LxWxH)
1.3 lbs (0.59 kgs)
2 RJ45 ports: 10/100/1000 Base-T autosensing, independent speed selection, Ethernet IEEE 802.3,
CAT5e copper cable
8 x RJ45 Jacks
Speed: 10/100Mbs (full duplex)
48-58 VDC (55VDC, 190W power supply included)
6W
DC voltage: 48VDC to 58VDC
IEEE 802.3af/at
If power is provided on all 4-pairs then maximum 50W;
If power is provided on 2-pairs then maximum 30W
+14°F to +149°F (-10°C to +65°C)
Tests conducted against international safety standard at maximum ambient temperatures of +104°F (40°C)
10% to 95% (non-condensing) at +95°F (+35° C)
UPLINK
GbE 1
PoE++ (50W) over 2- or 4-pair
UPLINK
GbE 2
UTP up to 2,000ft (610m)
Reach
2,000ft (610m)
1,000ft (300m)
2,000ft (610m)
1,000ft (300m)
2,000ft (610m)
750ft (228m)
1,000ft (305m)
41W
38W
25W
22W
750ft (228m)
1,000ft (305m)
29W
27W
25W
22W
Endpoint
1,250ft (381m)
1,500ft (457m)
35W
32W
22W
17W
1,250ft (381m)
1,500ft (457m)
26W
25W
20W
17W
Copyright 2018 NVT Phybridge | 445-0006 | Page 2
FLEX-C
Endpoint
FLEX-Link
Endpoint
FLEX-Link
Long Reach PoE over UTP
55VDC Local Power Optional
FLEX4
Endpoint
Endpoint
FLEX4
Long Reach PoE over UTP
Endpoint
Endpoint
55VDC Local Power Optional
1,750ft (533m)
2,000ft (610m)
30W
27W
14W
12W
1,750ft (533m)
2,000ft (610m)
23W
22W
14W
12W

Publicidad

loading