Storage And Transportation Guidelines; Waste Disposal; Start-Up - bredent Waxpool duo Manual De Funcionamiento Y Mantenimiento

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 30
Functional check/mains connection
Please ensure that...
 none of the components belonging to the device are damaged,
 there are no residues or contaminants on or in the device or the accessories,
 damaged accessories or components have been replaced,
 the mains plug and the insulation of the power cable are not damaged in any way,
 the mains plug fits into the socket and the network data corresponds with the data on the
type-plate
 the ambient temperatures are in a range of 5-40°C [41-104°F]
 the relative air humidity at 31°C [87.8°F] decreasing linearly does not exceed up to 50% relative
humidity at 40°C [104°F]
 the device is always positioned on a suitable flat and stable surface at work height,
 the dip tanks are not overfilled with wax or inclined - this can result in leakage
 Waxpool duo is not cleaned with compressed air,
 the device is switched off after use.
Materials and liquids
 Water and other liquids must not be allowed to penetrate the inside of the device, as this can lead
to short circuits and corrosion.
 Please only use commercially-available dental materials that are processed in Waxpool duo. Do not
use any inflammable or explosive liquids!
 Do not use any strong, corrosive or abrasive cleaning agents to clean surfaces.
 Only carry the device from A to B once it has cooled down and the wax is solid!
Hot surfaces - risk of burning!
The surface of the Waxpool duo can get hot during operation and may remain hot for a further
30 minutes after the device has been switched off. Always place a modelling blade on the wax
knife. The heating element can also get very hot.

3. Storage and transportation guidelines

The Waxpool duo must be stored in a dry area and in its original packaging. The unit is supplied in its
original box, since any damage that occurs would be attributable to the buyer if this was not the case!

4. Waste disposal

The device should be disposed of in accordance with the usual legal regulations for the disposal of waste
electronic equipment in the country in question (e.g.: recycling centre, Recycling plant).

5. Start-up

Check the device for any transport damage as soon as it is removed from the packaging. Report any transport
damage to bredent or an authorised dealer immediately.
The Waxpool duo may only be used by qualified personnel, such as dental technicians and dentists, or by
persons being instructed and supervised by such qualified personnel.
Insert the cable of the mains plug into the rear (16) of the device and connect to a power supply compatible
with the details on the type-plate. The device carries out a self-test, where the indicator lights (9, 10 and 11)
and the digital display (12) briefly illuminate. The current setting of °C or °F is displayed.
12
bredent GmbH & Co. KG · Weissenhorner Str. 2 · 89250 Senden · Germany · T: +49 7309 872-22 · F: +49 7309 872-24
www.bredent.com · @: info@bredent.com

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

11001500

Tabla de contenido