Maintenance; Guarantee And Spare Parts - PANCONTROL 400 Manual De Instrucciones

4. If the tested circuit is protected by a 30 mA RCD-breaker the circuit should
be switched off. If the If the RCD does not switch off, the switch is either
defective or the third prong (ground) of the plug is not in order.

8. Maintenance

Only authorized service technicians may repair the instrument.
Cleaning
If the instrument is dirty after daily usage, it is advised to clean it by using a
humid cloth and a mild household detergent. Prior to cleaning, ensure that
instrument is switched off and disconnected from external voltage supply and
any other instruments connected. Never use acid detergents or dissolvent for
cleaning.

9. Guarantee and Spare Parts

PANCONTROL instruments are subject to strict quality control. However,
should the instrument function improperly during daily use, your are
protected by a 24 months warranty from the date of purchase (valid only
with invoice).
Only trained technicians may carry out repairs to this device. In case of
spare part requirement or in case of queries or problems, please get in
touch with your vendor or:
EN 8