Dentist's Stool, Model C8 - CASTELLINI C7 Instrucciones De Operación

Adjusting the height of the backrest
The height of the backrest can be adjusted (it can be
moved a maximum of 60mm.).
The adjustment can be made manually by pulling the
backrest up.
NOTE: There are nine positions the backrest
can be set in.
To lower the backrest, proceed as follows:
● Move it up to the maximum height until the re-
lease mechanism is activated.
● Push the backrest down again until it is at the
minimum height possible.
● Move the backrest to the required position.
4.2. Dentist's stool, model C8
Adjustment levers.
L Lever to move the seat up and down.
Seat height adjustment.
● Sit on the seat as the weight of your body will help
move the seat down.
● Keep the lever (L) pulled up and the seat will move
down with the help of your body weight.
● To move the seat up again, keep the lever (L) pulled
up and lighten the load on the seat by standing up
slightly.
Adjusting the backrest.
It is advisable to adjust the position of the backrest of
the dentist's stool from behind.
● Simply move the backrest round on its support post
in order to bring it into the required position.
● To change the backrest over from its RH position to
the LH one, or viceversa, simply take hold of it with
both hands near the support and push it forwards.
In this way the lock mechanism disengages and
the backrest can then be turned round to the new
position where it will lock in place automatically.
24 EN
C7 / C8 / C9
- OPERATING INSTRUCTION
L