AIPTEK MyNote Premium II Manual Del Usuario página 17

Defining tablet functions
When using the digital pad as a tablet, various functions of the
digital pad can be defined in the tablet control panel.
1
Double-click the "USB Tablet" icon on the
system tray.
Double-click on the "USB Tablet" icon to bring up the
settings window.
If the icon does not display, please check and make sure: 1. the
tablet driver is installed; 2. the USB cable is well connected at both
ends. Unplug and re-plug the USB connector if you need to.
The following functions take effect when the digital pad is used
as a tablet. They are not functional when the digital pad is in
ink-capture mode (when the digital pad is not connected with a
computer).
2
Set unit and tracking mode.
Unit: You can select "inch" or
"cm" as the default unit.
Tracking mode: You can set
the pointer tracking mode to
"Pen" or "Mouse". In "Pen"
mode, absolute coordinates
are used. In "Mouse" mode,
you can use the digital pen to
move the pointer in the same
way as using a mouse.
You can update the driver by downloading new driver from the
Internet.
15