Inserting a memory card (optional)
In addition to the internal memory, the digital pad can also store
data on a Secure Digital (SD) card.
To insert a memory card, gently push the card as indicated until
the card reaches the bottom of the slot.
The SD card comes with a write-protect switch. Normally, the
card is non-writable when write-protect switch is set to the Lock
position. To prevent data missing if you neglect to set the write-
protect switch to the Unlock position during inking, this device
sets specifi c defi nition that the SD card will become writable
even the write-protect switch is set to the Lock position.
When a memory card is inserted, the digital pad will use the card
as the main storage medium. Files stored in the internal memory
will become inaccessible until the card is removed.
We suggest you use SD cards manufactured by Sandisk
provide the best compatibility with the digital pad.
The system will be powered off when you push out the SD Card.
4
as they
TM