Mopar 82213310 Instrucciones De Montaje página 14

14
38. Use a trim stick to pry off the inside footwell trim
panels on driver and passenger side.
39. Route the new body harness along the
existing harness under the dash and
secure with cable ties. Be sure the harness
passes behind the brake and accelerator
pedals without causing any interference.
Feed the end of the harness through the
center stack and out to the passenger
side footwell.
40. Use a pry tool to carefully remove the cover panel
under the glovebox. Pull down the carpeting in
the footwell.
9/25/12